|
Despite its compact dimensions, the P668M packs
15 Watts RMS output which will power most vehicle speaker
configurations. It can be used from a 12 or 24 Volts DC
supply, so it can be used in commercial vehicles and water
craft. A microphone can be plugged straight into the front
panel and an Aux input for tape, radio etc is on the rear
panel both inputs have independent level controls. There are
two separate speaker switches allowing selective output, and
there is a special third output for intercom and fog/siren
use. This allows the P668M to be used not only as an amplifier
and foghorn but also to communicate with another part of the
vehicle or vessel: the amplifier itself has a built-in speaker
to listen, while the other party uses the remote speaker as a
microphone. The Siren and Fog output can be manually sounded,
the Fog can also be set to Auto for unattended output.
Specifications:
| Colour: |
Black |
| Dimensions: |
60 x 170 x 185 mm |
| Weight: |
1.2 kg |
| DC Input: |
12 or 24v DC |
| Power RMS: |
15 watts |
| Frequency Response: |
200-15000Hz |
| Outputs: |
4,8 or 16 Ohm |
| Microphone Input: |
1.5mV 200-50k Ohm |
| Auxillary Input: |
200mV |
| Priority Microphone: |
No |
|
